Skip to Content
Orphic
/

Prop Modeling

What it does

It takes physical display props such as counter installations, stand props, display racks and light box brackets from a concept sketch to a 3D model and notes you can hand to a supplier. The reader is a brand’s merchandising, marketing or project lead, who takes the output to prop suppliers and mall management, so dimensions, materials and fabrication all need a stated basis.

Typical flow

  1. Give it material: a concept sketch, render or rough drawing, plus requirements such as size and material.
  2. Confirm the 3-view sheet: it first produces a flat 3-view modeling sheet. You approve it or ask for changes.
  3. Model: once approved, it builds the 3D model.
  4. Notes: a dimensioned drawing, assembly instructions and fabrication notes.

The 3-view sheet, revisions and the model all use credits, and it tells you before starting each.

What you get

  • A 3D mesh (STL / OBJ / GLB; STEP on request);
  • A dimensioned drawing and assembly instructions;
  • Fabrication notes: material, process, thickness, load and applicable standards.

Limits

  • Dimensions you give are used as given, with the source noted. Values it estimates or suggests are marked “suggested”, and anything uncertain is marked “confirm with supplier”.
  • STEP files are converted from the mesh: they open and measure in CAD but cannot be resized directly. If a supplier needs parametric edits, the model has to be rebuilt in CAD.
  • It does not do graphic design (use VI & Key Visual Design), full store design, construction drawings, or quotes and tenders.